Home Inspection Savage | Home Inspector 952-583-8608Buying a Home? Inspect the Plumbing First If you are in the market for a new home, it is wise to have the entire structure inspected, including the plumbing, before you close the deal. Never take everything at face value, especially when it comes to a major purchase like a home – doing so can make you end up spending a ton of cash later on down the road when you discover problems within the plumbing system. Most sellers are motivated to get rid of their real estate right now, which makes pointing out any big problems that you find all the more important. The inspector will look at the following areas for possible issues:
- Locate the water meter and make a determination if the shut off valve to the home’s water supply is in working order. When testing the shut off valve they will look to see that there should be no water coming out when they turn the taps on in the kitchen, bathrooms, or other areas.
- They will find out if there are any lead pipes in the home. Homes that were built prior to 1986 often have lead or galvanized plumbing. Lead, as you know, no matter how useful, is an environmental toxin (note the need for unleaded gasoline and paint in homes that is not lead based). If you have children, you may not want to live in a home that has lead pipes.
- Determine the size of the water pipes in the home and around the home – they will help to determine the water pressure that you’ll have. For water pressure to be adequate, the lines should be ¾” to one inch directly from the main water source for the home. The pipes themselves should be at least a ½” in diameter to provide adequate flow.
- Inspect the home’s hot water heater. They will be looking to see if it is big enough to accommodate your needs (a family of four should have at least a 40 gallon tank), where it is located, and the water heater’s age. They will check to see if there is a buildup of mineral deposits in the tank, if possible. Mineral deposits can settle on the tank’s bottom, leaving less room for water – which will mean that less water will be heated and available for use. Also, corrosion of the tank’s elements can cause the tank to have a short life. If the water heater is old or you see obvious signs of corrosion, request that a new one be installed.
- Make sure that the plumbing throughout the home is prepared for freezing weather by having pipes wrapped. The vents throughout the home should be the type that can be closed off in the winter time during periods of intense cold. For homes with wells, the well should be protected in some fashion from bitter cold as well.
- Determine the type of sewage system the home has, whether waste goes to a municipal sewer system, or if there is a septic tank installed. If the home has a septic tank, they will find out where it is installed on the property, how much the tank holds, and where the lines to the septic tank are located. They will look for signs of seepage around the area where the tank is located, or for standing water or noticeable odors – all of which are signs of a problem with the septic. Septic tanks can be very expensive (thousands of dollars) to replace or repair – so if there is a problem, demand that it is fixed prior to closing the deal.
- Inside the home, they will check the kitchen faucets and bathroom faucets for leaks or drips and check underneath sinks to check for leaking pipes.
- Flush the toilet in each bathroom. They should empty and then refill correctly.
- Turn on the shower in the room farthest from the home’s water source. Check the temperature of the water and the water pressure.
Home Inspection Savage | Home Inspector 952-583-8608